EDGE Tech QL Series Uživatelský manuál stáhnout pdf (Strana 27)

QL Series User Guide

Cable Communications

CAUTION. The power should be turned off before

connecting

or disconnecting the communications cable.

All QL Series printers can communicate by cable; the specif-

ic cable supplied with your printer will vary with the host ter-

minal. The 8- pin circular connector on your communications

cable plugs into the serial communications port on the side of

the printer. The connector is keyed to assure correct align-

ment; do not try to force the cable if it does not plug in. The

other end of the cable must be plugged into the host terminal

as shown in Figure 11, or to a serial port on a computer (Fig-

ure 12.) Communications between the terminal and the print-

er are controlled by the applications running on the terminal

and the printer.

Communications Cable to Terminal

Part number varies. Refer to Appendix A.

Communications

Port

Serial Communications Cable to

Computer

Refer to Appendix A for part numbers.

Figure 11: Cable Communications

Figure 12: Communications with a P.C.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 77 78

Žádné komentáře

EDGE Tech QL Series Uživatelský manuál Strana 27